Edge EAS Street Diesel Kit - EGT Probe Two 0-100 PSI Sensors and Starter Cable for CTS3 CTS4 - 98623

The Edge EAS Street Diesel Kit 98623 gives a tuned street diesel the three readings it should be watching on an Edge CTS3 or CTS4 monitor: exhaust gas temperature from a probe in the manifold, boost pressure, and fuel pressure from a second 0-100 psi sensor. The EAS Starter Kit cable and a two-input universal 5 volt harness are included, so nothing else is needed to get started.

Every channel shows on the monitor as a gauge with user-set alerts and is recorded in the data log. If you want a temperature sensor as well, the 98617 Competition Kit swaps one pressure sensor for a temperature sensor, and the 98618 Datalogging Kit doubles everything.

Compatible monitors

• Edge CTS3 and CTS4 displays (Insight, Evolution and Juice versions); also works with CS2 and CTS2
• Starter cable included; nothing else needed to get started

What is included and what it reads

• EAS EGT probe kit for exhaust gas temperature
• Two EAS 0-100 psi pressure sensors with 1/8 NPT thread, typically boost and fuel pressure
• EAS universal 5 volt harness kit with two inputs for the pressure sensors
• EAS Starter Kit cable
• All sensors daisy-chain under the hood; one cable comes into the cab

What is in the box

• 1 EAS Starter Kit cable
• 1 EAS EGT probe kit
• 2 EAS 0-100 psi pressure sensors
• 1 EAS universal 5 volt harness kit (two inputs)
• Instructions

Installation and limitations

Drill and tap the exhaust manifold for the EGT probe (or use an existing port), thread the pressure sensors into 1/8 NPT ports for boost and fuel, chain the modules together, and connect the starter cable to the monitor OBD-II cable. Select the channels and set alerts on screen. Pairs well with an Evolution CTS3 for Cummins or Power Stroke.

Specifications

• Part number: 98623
• Brand: Edge
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 9 x 6 x 2 in, 2 lb
• UPC: 810065218681

Frequently asked questions

Do I need anything else?

No. The starter cable, probe, sensors and harness are all in the box. You supply 1/8 NPT ports or adapters at the sensor locations.

Can the second sensor read fuel pressure?

Yes, within 0-100 psi, which covers lift pump and low-pressure fuel supply. It is not for high pressure common rail readings.

Which kit should I pick: Street Diesel, Competition or Datalogging?

Street Diesel for EGT, boost and fuel pressure. Competition for EGT, boost and a temperature. Datalogging for two of each.