Edge EAS Competition Kit - EGT Probe 0-100 PSI Pressure and Temperature Sensors with Starter Cable - 98617

The Edge EAS Competition Kit 98617 adds the three readings a modified diesel needs on an Edge CTS2, CTS3 or CTS4 monitor: exhaust gas temperature from a manifold probe, boost from a 0-100 psi pressure sensor, and a -40 to 300 degree F temperature sensor for the intercooler outlet, transmission or oil. The EAS Starter Kit cable and all harnesses are included.

Once a turbo upgrade or bigger injectors go in, the factory sensors stop telling the whole story. This kit is built for trucks that see the dyno, the sled pull track or the drag strip. If you need two of everything for a twin-turbo or dual-EGT setup, see the 98618 Datalogging Kit.

Compatible monitors

• Edge CTS2, CTS3 and CTS4 displays
• Starter cable included; nothing else needed

What is included and what it reads

• EGT probe kit for exhaust gas temperature
• 0-100 psi pressure sensor with 1/8 NPT thread for boost or drive pressure
• -40 to 300 degree F temperature sensor
• EAS Starter Kit cable and all wiring harnesses
• All sensors daisy-chain under the hood; one cable comes through the firewall
• Every channel shows as a gauge with alerts and is recorded in the data log

What is in the box

• EAS Starter Kit cable
• EGT probe kit
• 0-100 psi pressure sensor
• -40 to 300 F temperature sensor
• Harnesses and instructions

Installation and limitations

Mount the EGT probe in the exhaust manifold, thread the pressure and temperature sensors into 1/8 NPT ports where you want to read, chain the modules together under the hood, and connect the starter cable to the monitor OBD-II cable. Select the channels on screen.

Specifications

• Part number: 98617
• Brand: Edge
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 9.5 x 6.25 x 2.8 in, 1.5 lb
• UPC: 810115012320

Frequently asked questions

What is the difference from the Street Diesel Kit?

The 98623 Street Diesel Kit has an EGT probe and two pressure sensors. This kit has an EGT probe, one pressure sensor and one temperature sensor.

Can the temperature sensor read transmission temperature?

Yes, within -40 to 300 degrees F, in a 1/8 NPT port or adapter on the transmission, oil system or intercooler outlet.

Does it work with a CTS4?

Yes. The CTS4 detects the sensors automatically; the CTS2 and CTS3 also support them.