Edge EAS Universal Sensor Input Two Channel 0-5 Volt Module for CTS2 CTS3 CTS4 - 98605

The Edge EAS Universal Sensor Input 98605 is a two-channel 0-5 volt module for the Expandable Accessory System. It turns any 0 to 5 volt signal into a readable gauge on an Edge CTS2, CTS3 or CTS4 monitor, with A and B inputs for two sensors and two universal wiring harnesses included.

Several common devices are preloaded, and for anything else you scale the 0-5 volt range in the monitor yourself. Typical uses are a wideband AFR controller, an EGT amplifier, fuel pressure or any aftermarket sender you already own. Edge's own plug-in EAS sensors, the 98607 pressure sensor and 98608 temperature sensor, connect to this module with no wiring.

Compatible monitors and required hardware

• Edge CTS2, CTS3 and CTS4 displays
• Requires the EAS Starter Kit cable 98602 if this is the first EAS accessory on the vehicle; not included

What it does

• Two 0-5 volt channels (A and B)
• Includes one EAS daisy-chain connector and two universal wiring harnesses
• Preloaded scaling for common sensors, custom scaling for anything else
• Readings appear as gauge channels with user-set alerts and are recorded in the data log

Installation and limitations

Connect the module to the EAS chain, plug an Edge EAS sensor straight in or wire your own sensor to a universal harness, then select the channel and scaling on screen. Pairs well with the 98604 turbo timer on a diesel.

Specifications

• Part number: 98605
• Brand: Edge
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 9.5 x 6.25 x 1.5 in, 2 lb
• UPC: 810115011149

Frequently asked questions

Do I need the starter cable?

Yes, if this is your first EAS accessory. The starter cable 98602 connects the EAS chain to the monitor OBD-II cable and is sold separately.

Can I run two sensors?

Yes. The A and B inputs each take one 0-5 volt sensor, for example a 98607 pressure sensor and a 98608 temperature sensor.

Does it work with a wideband?

Yes. Any wideband controller with a 0-5 volt analog output can be wired to a universal harness and scaled on the monitor.