Edge EAS 0-100 PSI Pressure Sensor 1/8 NPT for CTS2 CTS3 CTS4 - 98607

The Edge EAS 98607 is a 0 to 100 psi pressure sensor with a 1/8 NPT thread, pre-wired to plug into the Edge Universal Sensor Input module (98605). It adds a live pressure reading, with alerts and data logging, to an Edge CTS2, CTS3 or CTS4 display.

Typical uses are boost, lift pump or fuel pressure, pre and post intercooler pressure, engine oil pressure, or air bag pressure on a towing setup. The sensor reads wet or dry media, so it works for fluids and air.

Compatible displays and required hardware

• Edge CTS2, CTS3 and CTS4 displays (Insight, Evolution and Juice versions)
• Requires the Edge EAS Universal Sensor Input 98605, sold separately; the sensor plugs into that module, not directly into the display
• Mounts in a 1/8 NPT port (or adapter) where the pressure you want to read is between 0 and 100 psi

What it does

• Reads 0 to 100 psi, wet or dry media
• 1/8 NPT thread
• Arrives with the connector that plugs straight into the Universal Sensor Input, no crimping or splicing
• Shows up as a selectable channel on the display with user-set alerts
• Recorded in the display's data logs alongside the factory parameters

Installation and limitations

Thread the sensor into the port, route the lead to the Universal Sensor Input, plug in, and pick the channel on screen. For a temperature reading instead, see the Edge EAS -40 to 300 F temperature sensor 98608.

Specifications

• Part number: 98607
• Brand: Edge
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 9.5 x 6.25 x 1.5 in, 2 lb
• UPC: 810115011231

Frequently asked questions

Does this plug straight into my CTS3?
No. It plugs into the EAS Universal Sensor Input module 98605, which connects to the CTS2, CTS3 or CTS4 through the EAS chain. The 98605 kit is sold separately.

Can I use it for fuel pressure?
Yes, within its 0 to 100 psi range. Edge rates the sensor for wet or dry media and lists boost, fuel and other fluid pressures as intended uses, which covers lift pump and port injection fuel pressure. It is not for direct injection high pressure fuel rails, which run far above 100 psi.

How many sensors can one Universal Sensor Input take?
Two. The 98605 has two 0-5 volt channels, so you can run this pressure sensor and a 98608 temperature sensor on the same module.