Edge EAS Control Kit - EGT Probe plus Power Switch with Starter Cable for CTS Monitors - 98616

The Edge EAS Control Kit 98616 bundles the two EAS accessories most diesel owners add first: an EGT probe kit for a true pyrometer reading on an Edge CTS2, CTS3 or CTS4 monitor, and a two-relay power switch to run two 12 volt accessories from the touchscreen. The EAS Starter Kit cable is included.

Everything daisy-chains under the hood and comes into the cab on one cable. If you also want pressure and temperature sensors, step up to the 98617 Competition Kit.

Compatible monitors

• Edge CTS2, CTS3 and CTS4 displays
• Starter cable included; nothing else needed to get started

What it does

• EGT probe kit with thermocouple and lead for exhaust gas temperature on screen
• Power switch with two relay outputs controlled from the touchscreen
• EAS Starter Kit cable included
• All accessories chain together on one cable into the cab

What is in the box

• EAS Starter Kit cable
• EGT probe kit with thermocouple and lead
• EAS Power Switch module
• Harnesses and instructions

Installation and limitations

Drill and tap the exhaust manifold for the EGT probe (or use an existing port), route the lead to the probe module, chain the power switch, and connect the starter cable to the monitor OBD-II cable. Wire your relays and accessories to the switch outputs. A replacement 15 inch thermocouple lead is available as 98920.

Specifications

• Part number: 98616
• Brand: Edge
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 9.5 x 6.25 x 1.5 in, 2 lb
• UPC: 810115012290

Frequently asked questions

Why add an EGT probe when the truck has a factory sensor?

Many trucks read EGT after the turbo or not at all. A manifold-mounted probe reads pre-turbo temperature, which is what matters when towing or tuned.

Can I add more sensors later?

Yes. Pressure and temperature sensors, a universal 0-5 volt input and more switches all plug into the same chain.

Does it include relays for the switch?

The switch provides the outputs; relays and accessory wiring are supplied by you.