AEM Classic Digital Oil Pressure Gauge Kit, 0-150 psi - 30-4407

The AEM 30-4407 is a Classic 52 mm digital oil pressure gauge kit reading 0 to 150 psi. AEM supplies a brass pressure sender and a plug-and-play harness in the kit.

The X-Series version is the X-Series 150 psi pressure gauge 30-0307.

Fitment and requirements

• Universal; needs a port for the included sender
• Needs switched 12V power, a ground, and a 52 mm (2-1/16 inch) gauge pod or panel hole
• No vehicle-specific harness; check clearance behind the pod for the gauge connectors

What it does

• Three-digit center readout plus a 24-LED outer sweep
• Black and silver bezels and black and white faces included so you can match your dash
• Auto-dimming display
• 0-5V analog output for data loggers and engine management
• Plug-and-play harness with the sensor included
• 52 mm (2-1/16 inch) housing

What is in the box

• Classic digital gauge
• Sensor
• Plug-and-play harness
• Black and silver bezels, black and white faces
• Mounting hardware

Installation and limitations

Install the sender, run the harness to the gauge and connect switched 12V and ground. Choose the bezel and face before mounting. Full details: AEM 30-4407 instructions (PDF).

Specifications

• Part number: 30-4407
• Brand: AEM
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 5.5 x 5.4 x 5.2 in, 0.77 lb
• UPC: 840879017330

Frequently asked questions

Does the AEM 30-4407 come with the pressure sender?

Yes. The AEM 30-4407 kit includes a brass pressure sender and a plug-and-play harness.

Can I log the AEM 30-4407 with an HP Tuners MPVI4?

Yes, with extra hardware. Wire the gauge 0-5V analog output into the PROLINK+ cable (sold separately), which brings external 0-5V signals into VCM Scanner, and enter AEM's pressure scaling from the instructions. See the HP Tuners MPVI4.