AEM X-Series Oil Pressure Gauge Kit, 0-150 psi - 30-0307

The AEM 30-0307 is a 52 mm X-Series digital gauge that measures oil pressure from 0 to 150 psi (0-10 bar). The kit includes a 150 psi brass pressure sender.

For high-pressure oil systems or fuel above 100 psi. Most street engines are fine with the X-Series 100 psi pressure gauge 30-0301.

Fitment and requirements

• Needs a 1/8 NPT port (or adapter) in the oil or fuel system for the sender
• Needs switched 12V power, a ground, and a 52 mm (2-1/16 inch) gauge pod or panel hole
• No vehicle-specific harness; check clearance behind the pod for the gauge connectors

What it does

• Measures 0-150 psi (0-10 bar)
• Large center LED readout plus a 24-LED outer sweep
• Face buttons for peak recall, warning thresholds and standard or metric units
• Auto-dimming display
• 0-5V analog output and AEMnet CAN for logging
• 52 mm (2-1/16 inch) body, 0.825 inch deep

What is in the box

• X-Series gauge with black bezel and black face
• Power/IO cable
• Mounting bracket and knurled nuts
• Butt connectors
• 150 psi brass pressure sender

Installation and limitations

Install the sender, run the cable to the gauge, and connect switched 12V and ground. Set units and a warning threshold from the face buttons. Full details: AEM 30-0307 instructions (PDF).

Specifications

• Part number: 30-0307
• Brand: AEM
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 5.5 x 5.4 x 5.3 in, 0.77 lb
• UPC: 840879024536

Frequently asked questions

Does the AEM 30-0307 come with the pressure sender?

Yes. The AEM 30-0307 kit includes a 150 psi brass pressure sender.

Can the 30-0307 read fuel pressure?

Yes, if fuel pressure stays within 0-150 psi.

Can I log the AEM 30-0307 with an HP Tuners MPVI4?

Yes, with extra hardware. Wire the gauge 0-5V analog output into the PROLINK+ cable (sold separately), which brings external 0-5V signals into VCM Scanner, and enter AEM's pressure scaling from the instructions. See the HP Tuners MPVI4.