Edge OBD-II to HDMI Power Cable for CTS2 CTS3 CTS4 Insight Trinity 2 Dashpaq Plus TrailDash 3 - 98109

The Edge 98109 is the OBD-II to HDMI cable that powers and connects Edge CTS2, CTS3, CTS4 and Insight monitors, the DiabloSport Trinity 2, and the Superchips Dashpaq Plus and TrailDash 3. It carries both power and vehicle data between the OBD-II port and the display.

It is the first thing to swap when a monitor flickers, reboots or will not power up, and a good spare to keep in the glovebox if you move the display between vehicles.

Compatible devices

• Edge CS2, CTS2, CTS3, CTS4 and Insight monitors
• DiabloSport Trinity 2 and Trinity 2 EX
• Superchips Dashpaq Plus and TrailDash 3

Details

• OBD-II connector on the vehicle end snaps into the factory port
• HDMI-style connector on the device end
• Carries power and data; no separate power wire needed
• Direct replacement for the cable supplied with the monitor

Installation and limitations

Unplug the old cable at both ends, route the new one from the OBD-II port to the display, and plug in. If the monitor still will not power up with a new cable, check the OBD-II port fuse before suspecting the display.

Specifications

• Part number: 98109
• Brand: Edge
• Warranty: 1 year manufacturer warranty
• Country of origin: United States
• Packaged size: 9.3 x 6.5 x 1.5 in, 1 lb
• UPC: 810065212726

Frequently asked questions

Is this the same cable that came with my CTS3?

Yes. It is the standard OBD-II to HDMI cable supplied with the CTS2, CTS3, CTS4, Insight, Trinity 2, Dashpaq Plus and TrailDash 3.

Does it work with the EAS accessories?

The EAS chain connects to this cable through the EAS Starter Kit cable 98602. This cable alone does not add an EAS connection.